Obtain work instructions and participate in review of asbestos removal control plan (ARCP) and safe work method statements (SWMS).

Gather safety requirements and data from an on-site assessment and asbestos register where available.

Use information sources to ensure the ARCP and SWMS are site-specific for the removal of asbestos materials.

Select tools, equipment, and personal protective equipment (PPE) consistent with job requirements to carry out tasks, check for serviceability, and rectify or report faults prior to commencement.

Notify regulator, occupants, neighbours, and other affected parties according to legislation and within limits of own responsibility and code of practice.

Contribute to the preparation and use of an emergency plan, within limits of own responsibility and according to legislative and company requirements.

Emergency response and evacuation procedures are known, practised, and carried out effectively when required.

Contribute to processes required to undertake air monitoring and to meet health monitoring requirements in line with level of authority and responsibility and regulatory requirements.

Identify location of non-friable asbestos materials and confirm with supervisor location of site boundaries.

Implement signage and barricade requirements to delineate the asbestos removal site according to ARCP.

Prepare and place materials and equipment required for removal of ACM from site.

Fit-check respiratory protective equipment (RPE) and fit PPE.

Wet down or spray work area with particle binder.

Carry out asbestos removal ensuring airborne asbestos fibres are kept to a minimum (i.e. appropriate tools, wet removal, minimise breakage, good handling techniques).

Contain, wrap, or otherwise seal the wet asbestos, place into removal bags or bins, seal, and label according to ARCP.

Carry out decontamination of the work area and tools according to ARCP.

Carry out personal decontamination according to ARCP.

Remove asbestos waste materials and equipment from the area according to ARCP.

Store tools, plant, and equipment according to manufacturer recommendations and regulatory requirements to ensure site is ready for clearance inspection.

Take steps to ensure clearance inspection requirements are met, within the limits of own responsibility and to ensure clearance certificate is gained from a competent person or licensed asbestos assessor.

Ensure clearance inspection is undertaken prior to removing signage, plant, and equipment.

Contribute to the preparation and use of documentation for regulatory notification processes, within limits of own responsibility and according to legislative and company requirements.

Provide stakeholders with clearance inspection certificate prior to reoccupation, as required.