| Australian Standards – Compliance with |
Fences & gates |
| Backflow Prevention Guide NSW |
Fire safety guidelines |
| Backflow Prevention Guide VIC |
Fire resistance |
| Balustrades |
Fire services |
| B.C.A. – History of |
Fireplaces & heaters |
| BCA Area Map |
Fire ratings – Guidance notes |
| BCA Volume 1 |
Fire and Sound rated wall and floors |
| BCA Volume 2 |
Fire and Sound rated external walls |
| Brick, Blocks & Mortar Mixes |
Flashings |
| Brick, brick veneer, blockwork |
Flooring |
| Building process – Index |
Footings & slab construction |
| Building Terminology |
Footings preparation |
| Building Approval Process – NSW |
Foundation site classification |
| Building Approval Process – QLD |
Framing – wall, bracing, tie-down |
| Building Materials |
Glazing |
| Bush Fire Attack Level |
Insulation in Buildings – benefits of |
| Building Regs – ACT |
Landscaping |
| Bush Fire Compliance |
Liveable housing design |
| Bush Fire Zones – Windows & Doors |
Masonry accessories |
| Bushfire Prone Zones – QLD |
Mechanical services (air con & extraction) |
| Bushfire Prone Zones – NSW |
No go zones |
| Bushfire Prone Zones – VIC |
Plumbing Regulatory Authorities _ Vic |
| Bushfire Prone Zones – SA |
Painter |
| Commercial Character Code |
Paving |
| Completed Residential Building Inspection |
Piling |
| Concrete & Reinforcement Properties |
Property development |
| Consumer Building Guide |
Reinforcing & concrete placement |
| Construction Plan – Prepare & Implement |
Retaining walls |
| Dampcourse, Weepholes, Termites |
Roof- insulation & ventilation |
| Design for Adaptable Housing – Disability |
Roof – conventional |
| Design for Health & Amenity |
Roof – metal |
| Design & Construction Manual Class 1 Buildings |
Roof – tile |
| Design & Construction Manual Class 2 & 3 Buildings |
Roof – drainage, gutters, downpipes |
| Design and Siting Standards – Under 450sm |
Sand & cement render |
| Design and Siting Standards – Lots over 450sm |
Site set-out / Surveying |
| Design and siting standards – Duplex |
Site surface drainage |
| Design steel beam guardrails TMR |
Smoke alarms |
| Design – preventing structural damage |
Stair construction |
| Design – structural engineering class 2&3 |
Steel framing |
| Design tables – structural steel in buildings |
Structural principles applied |
| Determining Wind Speed |
Sub-floor ventilation, structure |
| Development code part 11 (Qld) |
Swimming pool compliance |
| Development code part 12 (Qld) |
Termites |
| Dial B 4 U Dig |
Tiles – floor & wall finishes |
| Disabled access |
Timber durability |
| Door & jambs |
Timber mouldings |
| Driveways class 1 & 10 |
Trusses |
| Electrical services |
Working near underground assets |
| Energy efficiency |
Waterproofing to wet areas |
| Environmental controls & waste management |
Water supply & waste water |
| Excavation & fill for Retaining walls class 1 & 10 |
Wet area materials |
| Excavations and backfilling |
|
